Diverse considerazioni importanti per le imprese quando si utilizzano i raffreddatori per riscaldamento
Oltre a quanto sopra indicato, le imprese devono prevedere una persona responsabile dell'avvio e dell'arresto dei frigoriferi, degli interruttori, delle riparazioni e della manutenzione. Le precauzioni per l'uso dei frigoriferi nelle aziende sono...
First, the refrigerant leaked
Leakage of refrigerant not only affects the cooling efficiency of the heating and cooling machine, but also affects the health of the personnel involved in the engine room due to leakage of the refrigerant. Therefore, the problem of leakage of the refrigerant must be noticed.
Under normal circumstances, the refrigerant is not a consumable product, so it will not be constantly missing. If it is often or abruptly missing, it is recommended to check whether the refrigerant in the refrigerator is leaking. If there is a leakage problem, the leak should be found in time and make up for leaks, or replace the relevant refrigerant piping and connections. And if necessary, it should perform forced ventilation.
Second, pay attention to the load of the refrigerator
The load on the refrigerator is larger, or it exceeds the rated load, resulting in overload, which will affect more serious problems, including reduction of cooling efficiency, increase of noise, increase of vibration amplitude, excessive consumption of electrical resources, reduced life expectancy and so on. It needs to pay attention!
Third, temperature and pressure
It can be said that the parameters related to temperature and pressure are the most important parameters of the refrigerator. Enterprises should pay attention to the parameters related to the temperature and pressure of the refrigerator. Solve problems in time, and avoid affecting the normal operation of the refrigerator.

Raccomandazioni correlate
-
Effect Of Humidity On Laboratory Chillers
1006The high humidity reduces the insulation strength of the electrical equipment of the chiller in the laboratory. The moisture in the air adheres to the surface of the insulating material to form condensation, which reduces the insulation resistance...
Visualizza i dettagli -
Motor cooling system tests the effect of condensing temperature
1253The motor cooling system tests the condenser. Under normal conditions, the first half of the heat pipe is very hot, and its temperature has a slow and slow gradual decline in the balance of power. The heat sensitivity of the second half of the hea...
Visualizza i dettagli -
Solutions to high-pressure failures of deep-circulation chillers
970Deep-circulation chillers are process cold sources used in the production and processing of chemical and pharmaceutical intermediates, petrochemicals, machinery, medicine, electronics, new materials, aerospace, optoelectronic technology, and new e...
Visualizza i dettagli -
Configuration form of circulating heating unit for laboratory
909The standard model of the circulating heating unit for LNEYA laboratory is: SUNDI, the temperature range is from room temperature to minus 120 degrees Celsius, and the capacity can be divided into 5L, 10L, 20L, 30L, 40L, 50L, 80L, 100L, larger cap...
Visualizza i dettagli