How to maintain stable performance of biopharmaceutical laboratory oil cooler?

1. A suitable working environment to prevent various failures of the oil cooler in the biopharmaceutical laboratory needs to provide a better operating environment for the equipment. Keep the environment clean and tidy, reduce the impact of various types of dust, thereby improving the stability of heat dissipation, improving the cooling performance, reducing the ambient temperature in a shorter period of time, and reducing the energy consumption of equipment used by enterprises.
2. Maintain a low failure rate, and carry out meticulous maintenance and maintenance on a daily basis. At the same time, operators are required to complete the opening and closing of the equipment according to the use steps required by the manufacturer, so as to avoid wrong operation behaviors and lead to the use of oil coolers in biopharmaceutical laboratories. Life is affected, and even various failures continue to occur.
3. Timely maintenance of minor faults requires the company to timely and effectively complete the entire maintenance process for the failure of the oil cooler in the biopharmaceutical laboratory to reduce the impact of minor faults.
4. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
5. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
6. When an alarm occurs, the meaning of the alarm should be judged in time. If it cannot be solved by itself, it should be reported to the refrigerator manufacturer for repair to avoid the expansion of the fault range and the overrun of the maintenance cost.
7. It is strictly forbidden to short-circuit the water flow switch circuit during the use of the equipment. Short-circuiting may cause the equipment pipes to freeze and damage, which will affect the normal use of the equipment.
8. In actual operation, operators are required to record various operating data of the equipment on time, analyze regularly, find problems through data, and eliminate hidden dangers for problems.
In addition to the above methods, the operation management of the oil cooler in the biopharmaceutical laboratory is also very critical. Mastering the scientific operation procedures, maintenance and repair methods of the equipment, as well as the management of the maintenance, transformation and disposal of the refrigeration unit can ensure that the equipment is always in good condition. operating status.
Raccomandazioni correlate
-
Temperature control system for controlling integrated circuit chip test temperature
1044Advances in semiconductor technology have led to the development of next-generation electronic devices such as integrated circuits, which have more and more active components, higher circuit complexity, smaller area, and tighter wiring. These attr...
Visualizza i dettagli -
Descrizione del compressore del dispositivo di prova del calore umido ad alta e bassa temperatura
1232I diversi tipi di compressori per i dispositivi di prova del calore umido ad alta e bassa temperatura hanno spesso un impatto sul prezzo. Al momento della scelta, dovremmo scegliere compressori di refrigerazione a basso consumo energetico il più possibile. Ora la Cina sta prestando sempre più attenzione...
Visualizza i dettagli -
Precautions for installation of special chiller for new energy testing
940The installation of the special chiller for new energy testing is an important link before operation. The quality of the installation is directly related to the operation and operation status of the special chiller for new energy testing. So, what...
Visualizza i dettagli -
Effect Of Humidity On Laboratory Chillers
1006The high humidity reduces the insulation strength of the electrical equipment of the chiller in the laboratory. The moisture in the air adheres to the surface of the insulating material to form condensation, which reduces the insulation resistance...
Visualizza i dettagli