Refrigeratori industriali LNEYA Produttore Fornitore
Reattore in vetro laminato
5L, 10L, 20L, 50L, 100L, 500LDouble-layer glass reactors are suitable for the reaction of large amounts of liquids. The heating speed is fast and uniform, but the operation is more complicated and requires strict control of temperature and pressure. The interlayer circulates through the cold and heat sources. The interlayer of the glass reactor can provide high-temperature reactions (the highest temperature can reach 300°C); the glass reactor can also do low-temperature reactions (the lowest temperature can reach -80°C); the glass reactor can be evacuated for negative pressure reactions.
The body of the three-layer glass reactor is a double-layer structure. The inner interlayer is connected to the temperature control circulation device, and the temperature of the material in the reactor is adjusted by the circulating liquid; the outer interlayer can be pumped to a negative pressure state to achieve a vacuum insulation function, which can prevent the reactor body from frosting under low temperature conditions and facilitate observation of the reaction conditions in the reactor.
Glass jacket open cover reactor
Special durable mixing shaft seal
Double layer anti-corrosion mixing paddle
Bottom discharge valve with no liquid accumulation and large diameter
Stainless steel frame
Variable frequency over torque protection mixing control
Explosion proof models are optional
Parametri
| 1 | Reaction kettle body (L) (open cover type) | 10L, 50L,100L,150L |
| 2 | Maximum discharge diameter(mm) | ∅32 |
| 3 | Number of kettle cover interfaces | 7 |
| 4 | Velocità di rotazione (giri/min) | 20-400 |
| 5 | Torque(Ncm) | 390 |
| 6 | Stirring rod diameter(mm) | ∅20 |
| 7 | Alimentazione | 220V, 1P, 50/60Hz |
| 8 | Dimensioni complessive (cm) | 110x60x230H |
Function Configuration
| 1 | Frequenza | ● |
| 2 | Display digitale | ● |
| 3 | PTFE combined seal | ● |
| 4 | PTFE direct discharge valve | ○ |
| 5 | PTFE closed discharge valve | ● |
| 6 | PTFE filling valve | ● |
| 7 | Dropping system(L) | 5L |
| 8 | Solid feed port | F80 |
| 9 | Thermometer | ● |
| 10 | Vacuometro | ● |
| 11 | Tangential interlayer inlet and outlet | F40-M30x1.5 |
| 12 | Reflux condensation | ● |
| 13 | Distillation-layering-collection | ○ (10L) |
| 14 | Distillation collection * | ○ |
| 15 | Sampling bottle | ○ |
| 16 | Jacket pressure regulating device * | ○ |
| 17 | Kettle pressure relief valve * | ○ |
| 18 | Kettle body spoiler baffle | ○ |
| 19 | Stainless steel base | ● |
| 20 | Moving pulley | ● |
| 21 | Explosion-proof/Pneumatic Modification* | ○ |
| 22 | Overcurrent protection | ● |
| 23 | Spark-free electronic control system | ○ |
Symbol meaning:/- None, ● – Equipped, ○ – Optional (* – This optional function must be assembled during factory production and cannot be separately equipped)
Nota: i parametri specifici dei modelli associati o personalizzati possono differire da quelli dei modelli standard. Potete contattarci per richieste specifiche.
Descrizione del prodotto
Kettle cover configuration (above 10L)
● Feeding valve—clean feeding throughout the process, no pollution
● Thermometer—directly measures material temperature
● Condenser—ball mouth connection, easy to install and shock-absorbing
● The kettle cover interface is fully upgraded to flange connection, equipped with SENCO quick-release flange clamping ring. The interface is not bitten and the glass is not damaged.
● The main bottle has no cone mouth, eliminating the damage to the bottle body caused by the cone mouth biting
PTFE bottom side discharge valve:
No dead angle, no liquid accumulation, maximum discharge diameter Ø20~32mm. The pre-tightened structure can effectively reduce the risk of accidental damage to the reactor body due to excessive top rotation of the bottom valve, which is particularly important for pilot reactors.
Quick-release flange clamping ring:
It can provide a new experience of flange connection with high airtightness, high corrosion resistance, and easy loading and unloading.
PTFE feeding valve:
The latest structure and material design, high clean feeding throughout the process, high corrosion resistance and wear resistance.
Mirror flange processing technology:
SENCO flange uses fine cold grinding and polishing technology to ensure the airtightness of static interface connection.
E-mail: sales@cnzlj.com
WhatsApp: 086 13912479193
Il precedente: Distillazione molecolare (Distillazione a corto raggio)Il prossimo: Evaporatore rotante 1-50L
Raccomandazioni correlate
-
Evaporatore rotante 1-50L
2264Small desktop rotary Evaporator 1L~5L Pilot and ground mounted rotary evaporators 10L~50L Rotary evaporator, also known as rotary evaporator. It consists of motor, distillation flask, heating pot, condenser and other parts. It is...
Visualizza dettagli -
Distillazione molecolare (Distillazione a corto raggio)
2496La distillazione a corto raggio (distillazione molecolare) è una nuova tecnologia di separazione in grado di risolvere problemi che le tecniche di distillazione convenzionali non possono risolvere. Può ottenere la separazione liquido-liquido a temperature molto inferiori a quelle di ebollizione...
Visualizza dettagli -
Serie ST
2462ST-25W ST-38W ST-60W ST-100W ST-200W ST-300W Pressione del vapore 4～6bar Intervallo di temperatura dell'acqua calda RT+10℃～135℃ Precisione del controllo della temperatura ±1℃ ±1℃ ±1℃ ±1℃ ±1℃ Capacità di trasferimento del calore max 25kW 38kW 60kW 100kW 200kW 300kW...
Visualizza dettagli -
Serie AET
4579Adatto per il test IC di tutti i tipi di chip semiconduttori, memorie flash Flash/EMMC, circuiti stampati PCB, comunicazioni ottiche, industrie elettroniche, ecc. Condizioni di prova nominali: temperatura di bulbo secco 20℃;...
Visualizza dettagli
Invia per la consultazione
Vi risponderemo entro 24 ore