Semiconductor refrigeration temperature control table cooler operation instructions
The power supply switching of the control system of the transformer cooling system of the semiconductor refrigeration temperature control station uses the imported dual power automatic switching device. Its main function is automatic switching between the active and standby working power sources. When the common power failure occurs, it automatically switches to the standby power supply. When both power supplies are normal, the common power supply works and the standby power supply is in standby state. The semiconductor refrigeration temperature control station programmable controller (PLC) is the control center of the execution part of the strong oil air cooler control device. It receives various status signals from the transformer to control the execution part.
When the transformer of the semiconductor refrigeration temperature control console is put into operation, a group of coolers will be put into operation, that is, the working group cooler is operated. The auxiliary cooler is controlled according to the oil surface temperature of the transformer, the winding temperature, the load signal, etc., and the auxiliary cooler can be activated as follows. The cooling method of the semiconductor refrigeration temperature control transformer is forced oil circulation air cooling, and at least one group of coolers should be operated after the transformer is put into operation. The control box of the semiconductor refrigeration temperature control station is controlled by intelligent equipment, and the cooling device for controlling the transformer is mainly controlled by a main switch such as a change switch on the control panel.
The structure and operation description of the semiconductor refrigeration temperature control station are as shown above. When the user operates the semiconductor refrigeration temperature control station, the operating efficiency of each component is ensured as much as possible, so that the overall operating efficiency of the semiconductor refrigeration temperature control station can be improved.
Raccomandazioni correlate
-
The reason why the cooling water circulator needs the main water circulation
1848The supplement of the water cycle is directed to a water-cooled cooling water circulator, and the air-cooled cooling water circulator does not have this problem. The water-cooled cooling water circulator needs cooling water during normal operation...
Visualizza dettagli -
About vocs condensation adsorption machine resonance fault description
1651When choosing vocs condensation adsorption machine, LNEYA recommends selecting reliable vocs condensation adsorption machine equipment to avoid some simple faults, but if a similar resonance fault occurs, it needs to be solved in time. For VOCS ga...
Visualizza dettagli -
Vapor deposition coating machine temperature control system-cooling water system
1711The main purpose of the vapor deposition coating machine is to carry out scientific experiments and research on film formation process. It is composed of quartz tube reaction chamber, heat shield furnace cabinet, electrical control system, vacuum ...
Visualizza dettagli -
Istruzioni per la selezione del volume della camera per prove d'urto ad alta e bassa temperatura di piccole dimensioni
1858Quando il prodotto di prova (componenti, componenti, componenti o macchina completa) viene posto in una piccola camera di prova d'urto ad alta e bassa temperatura per il test, al fine di garantire che l'atmosfera intorno al prodotto di prova possa...
Visualizza dettagli
Refrigeratori industriali LNEYA Produttore Fornitore










