Description of high and low temperature circulation tank refrigeration process
In the process of using high and low temperature circulating tanks, there may be some minor problems due to improper use, and there may be problems in the refrigeration process of Wuxi Guanya high and low temperature circulating tanks, and then we will explain them.
Most high and low temperature circulating tanks cool the media for cooling, but some simple techniques that rely on air or water contain a cooling coil that regulates temperature. The high and low temperature circulation tanks are used as a closed loop system for complete packaging, including hot and cold water units, condensers and circulation pumps, high and low temperature circulation tank expansion valves, partial cold water tanks, and temperature control stations. The closed loop industrial screw high and low temperature circulation tank recirculates water cooling equipment and instrument cleaners at constant temperature and pressure, increasing stability and repeatability.

If there is a high temperature difference between the two, the large external tank will be used to store cold water. In this case, the cooling water does not go straight from the cooler application, but goes deep into the outside of the tank as a “temperature buffer sorting behavior. The cold water tank is much larger than the internal water tank. Cold water from the external fuel tank application And returning hot water from the application can be traced back to the external fuel tank, not to the unit.
One of the new developments in high and low temperature circulating tanks is air cooling, not the use of cooling water. In this case, the condenser is not cooled with hot air refrigerant, but is used by a cooling water cooling tower. This development allows for more than 15% and allows for a reduction in energy demand in the cooler due to the small area of surface water, condensers and fans. In addition, the fans allowed a significant reduction in noise levels.
At the same time, the high and low temperature circulation tanks also need to pay attention to the usual maintenance work, so that the high and low temperature circulation tank can exert a large operating power.
Raccomandazioni correlate
-
What are the applications of steam circulators in chemical industry?
955The steam circulator in the chemical industry is a temperature control equipment in the pharmaceutical and chemical industry. When users operate, they need to understand the performance and maintenance knowledge in order to operate the equipment e...
Visualizza i dettagli -
Cooling simulation system for battery pack extreme performance test
1121With the development of technology, pure electric vehicles are becoming more and more common, but pure electric vehicles are difficult to get a better solution in terms of cruising range, charging speed, and pollution after battery waste. This mak...
Visualizza i dettagli -
Introduction to the quality and configuration of industrial refrigeration and heating circulators
855With the development and progress of society, industrial refrigeration and heating circulators are used more in the industry, and the technological level is becoming more and more complex. So, what should users pay attention to after purchasing th...
Visualizza i dettagli -
Chip IC dedicated refrigeration heating test machine instructions
1029The semiconductor chip Chiller is a temperature test simulation used in semiconductor testing. As a professional manufacturer, LNEYA has a wide temperature orientation and high temperature rise and fall, and the temperature range is -92 ° C ~ 250 ...
Visualizza i dettagli