Regarding the selection of refrigeration equipment, if it is necessary to cool deionized water to 2℃and maintain stability, the following key points should be noted:

A closed cycle chiller made of corrosion-resistant materials such as titanium alloy and 316L stainless steel should be selected to avoid metal corrosion caused by the low conductivity of deionized water.

The equipment should be equipped with a precise temperature control system (with an accuracy of ± 0.1 ℃) and a built-in water quality monitoring module (such as a conductivity sensor) to monitor the purity of water in real time.

Industry adaptation:

In the pharmaceutical field, a hygienic design that complies with GMP standards and is equipped with online sterilization functions (such as ozone or ultraviolet radiation) is required.
Precision instrument cooling: Add variable frequency pumps and buffer tanks to achieve fluctuation control of ± 0.05 ℃.
Industrial application: Modular design, expandable to -10 ℃ working conditions, flow range covering 5-500L/min.

In terms of heating methods, common ones include steam heating, thermal oil heating, etc. Steam heating may require boilers, suitable for factories with steam supply; Thermal oil is suitable for high temperatures and requires uniform heating. Cooling methods may include water cooling, air cooling, refrigeration units, etc. High water cooling efficiency, but requires a stable water source; Air cooling is suitable for situations with low ambient temperatures; Refrigeration units can accurately control temperature, but the cost is relatively high.

At the same time, it is necessary to consider the material of the equipment, the intelligence of the control system, safety, energy efficiency, and the convenience of maintenance and cleaning.

Selection suggestion: jacketed reactor+heat exchange system; Thermal oil: High temperature uniform heating, suitable for scenarios with large capacity or requiring higher temperatures (>100 ℃). Rapid cooling: Equipped with a refrigeration unit (such as a chiller) to achieve active temperature control. Natural cooling: Suitable for scenarios with low cooling speed requirements through cooling towers or circulating water systems.

LNEYA can provide high-precision solutions: heat transfer oil heating+refrigeration unit cooling+PLC fully automatic control. Applicable scenarios: pharmaceuticals, precision chemicals, requiring rapid temperature rise and fall (such as heating and cooling completed within 1 hour).

When electrical equipment is operating outdoors, it may encounter high temperature environments. For example, in direct sunlight in the summer, the temperature may be very high. If the equipment overheats, it will affect performance or even damage. At this time, the chiller can cool down and keep the equipment running stably. High-power equipment, such as transformers, inverters or generators, these equipment will generate a lot of heat during operation. If the heat cannot be dissipated in time, it may lead to performance degradation: high temperature will reduce the efficiency of electronic components (such as increased resistance and insulation aging). Shortened life: continuous high temperature accelerates equipment aging and even causes failures (such as capacitor bursting and circuit board burning). Safety hazards: overheating may ignite surrounding materials or cause equipment to short-circuit. At this time, the chiller can cool down and keep the equipment running stably. If natural heat dissipation is not enough, forced cooling is required, and chillers are the solution. If the equipment shuts down due to overheating, it may cause project interruption, affecting progress and even safety. As an active cooling system, chillers can prevent this situation and improve system reliability.

To summarize, the roles of cooling systems in outdoor projects include temperature control, improving efficiency, protecting equipment, adapting to harsh environments, energy saving and environmental protection, flexibility, and safety.

In summary, the cooling and heating system of the reaction kettle is crucial in the pharmaceutical process, ensuring precise control of reaction conditions, improving efficiency, ensuring product quality and safety, and adapting to diverse production needs. Choosing a straight through or secondary heat exchange TCU requires comprehensive consideration of process requirements, medium compatibility, temperature range, cleanliness requirements, and space maintenance. The straight through type is suitable for situations with rapid temperature change, medium compatibility, and limited space; The secondary heat exchange type is suitable for processes with high-precision control, incompatible media, or extreme temperatures.

The application of water chillers in hydraulic systems is to effectively remove the heat generated by hydraulic oil during operation, ensuring that the hydraulic system can operate stably within a suitable temperature range. Appropriate cooling can not only improve the efficiency and reliability of the system, but also extend the service life of the equipment. The following is a detailed introduction about the use of water chillers in hydraulic systems:

The role of water chiller in hydraulic system

1.Temperature control:
During the operation of hydraulic systems, a large amount of heat is generated due to friction and power loss of pumps, valves, and other components. If these heat cannot be dissipated in time, it will cause the temperature of the hydraulic oil to rise.
High temperature can reduce the viscosity of hydraulic oil, affect the lubrication effect of the system, and may lead to problems such as aging of seals and decreased material properties.
Water chillers use circulating cooling water to remove excess heat and maintain the temperature of hydraulic oil within a safe operating range (typically 30 ° C to 50 ° C).

2.Improve system efficiency:
Maintaining hydraulic oil within the optimal temperature range can reduce energy loss and improve the overall efficiency of the hydraulic system.
A stable oil temperature helps reduce wear and failure rates, thereby improving the reliability and lifespan of the system.

3.Protect hydraulic components:
Excessive temperature may cause premature damage or failure of key components such as hydraulic pumps, motors, valves, etc.
By effective cooling, these components can be prevented from being damaged due to high temperatures, reducing maintenance costs and downtime.

4.Extend the service life of hydraulic oil:
High temperature will accelerate the oxidation and decomposition of hydraulic oil, shortening its service life.
Appropriate cooling can slow down this process, extend the replacement cycle of hydraulic oil, and save operating costs.

Main features of LNEYA water chiller

1.Efficient cooling capacity:
Adopting efficient heat exchanger designs, such as plate heat exchangers or shell and tube heat exchangers, to achieve fast and uniform heat exchange.
The flow rate of cooling water can be adjusted according to actual needs to ensure the best cooling effect.

2.Precise temperature control:
Using PID controllers or other advanced temperature control technologies to achieve high-precision temperature control, ensuring the stability and consistency of hydraulic oil temperature.
The control accuracy is usually within ± 1℃ or less, meeting the needs of different application scenarios.

3.Compact structure and easy installation:
Water chillers typically have a compact design that facilitates integration into existing hydraulic systems.
Provide multiple installation methods, such as wall mounted, foot mounted, etc., to adapt to different site conditions.

4.Safety protection measures:
Equipped with functions such as over temperature protection, over voltage protection, and leak detection to ensure the safe operation of the equipment.
Equipped with an emergency stop button, the system can be quickly stopped in case of an emergency.

5.User friendly interface:
Provide a touch screen or digital display screen to visually display the current temperature, set temperature, and other parameters.
Supports programming and data recording functions, making it convenient for operators to monitor and manage.

Application examples

1.Construction machinery:
In construction machinery such as excavators and loaders, water chillers can help maintain the normal operating temperature of hydraulic systems, improve work efficiency and safety.

2.Industrial Machinery:
In industrial machinery such as injection molding machines and stamping machines, water chillers can effectively remove heat from hydraulic oil, ensuring the stability of the production process and product quality.

3.Metallurgical industry:
In metallurgical equipment such as rolling mills and continuous casting machines, water chillers are crucial for maintaining the low-temperature operation of hydraulic systems, significantly improving equipment reliability and production efficiency.

The application of water chillers in hydraulic systems is crucial for ensuring stable system operation and extending equipment lifespan. By selecting appropriate cooling capacity and temperature control system, efficient thermal management and precise temperature control can be achieved. It is recommended to consult a professional equipment supplier or engineer before purchasing to ensure the selection of the most suitable water chiller for your needs. In addition, regular maintenance and inspection of the water chiller and its connecting pipes are also very important to ensure that it is always in optimal working condition.

In the injection molding industry, the cooling system of injection molding machines is crucial for ensuring production efficiency and product quality. During the injection molding process, the mold and plastic melt require rapid and stable cooling to avoid product deformation, shrinkage, or other quality issues.

1.Power matching

Firstly, the power of the chiller needs to meet the requirements of the injection molding machine. Injection molding machines usually indicate their power requirements, including power supply voltage and rated current. When choosing a chiller, it should be ensured that its power is greater than or equal to the required power of the injection molding machine to ensure that the chiller can provide sufficient cooling capacity. At the same time, it is necessary to consider the cooling capacity of the chiller (usually measured in tons) to ensure that it can cover the cooling needs of the injection molding machine at maximum load.

2.Temperature control

The temperature range of the cooling water for injection molding machines is generally between 6 ℃ and 18 ℃. During the injection molding process, the plastic particles are melted by heating and injected into the mold. After solidification, the mold is opened and the molded plastic workpiece is ejected. In the continuous production process, it is necessary to cool the mold to shorten the plastic setting time, improve the dimensional accuracy, molding quality, and surface quality of the workpiece.

Temperature range: The temperature of the cooling water is usually required to be between 6 ℃ and 18 ℃.
Temperature difference requirement: The temperature difference of the cooling water should be controlled within 0 ℃ or ± 0.5 ℃ to ensure precise control of the mold temperature.

Choosing the appropriate chiller is the key to ensuring cooling effectiveness. The cooling capacity of a chiller is related to the injection volume of the injection molding machine, and the larger the injection volume, the greater the required cooling capacity.

3.Traffic demand

Injection molding machines require a certain amount of cooling water to maintain temperature stability of the mold and melt during operation. Therefore, when choosing a chiller, it is also necessary to consider whether its cooling capacity can meet the water flow requirements of the injection molding machine. Generally speaking, the cooling capacity of a chiller should be able to meet the water flow rate and temperature difference required by the injection molding machine to ensure its normal operation.

4.Pipeline connection and piping system

The pipeline connection and piping system between the chiller and injection molding machine are also important factors to consider when selecting.

5.Flow rate and pressure of ice water machine

Generally, for the cooling of injection molding molds, the pressure of ice water should be selected between 0.1 and 0.2 MPa to meet the requirements.

In the field of new material preparation, by accurately controlling the reaction temperature, the influence of different temperatures on the microstructure and macroscopic properties of materials can be explored, thereby developing new materials with better performance and more comprehensive functions. For example, in the process of synthesizing high-performance polymers, nanomaterials, etc., the heating and temperature control system of the reaction kettle can ensure that the reaction proceeds at a suitable temperature, thereby improving key performance indicators such as conductivity and stability of the material.

The process of manufacturing catalytic materials that requires a chiller includes cooling process equipment, refrigerant circulation, freeze-drying, and cooling testing equipment. The chiller plays an important role in these processes, as follows:

• Cooling process equipment: In the chemical production process, chillers can be used to cool various process equipment, such as reaction vessels, distillers, dryers, etc. These devices need to be operated at low temperatures to ensure the stability and safety of the process. The chiller provides a stable low-temperature environment to ensure the smooth progress of the process.
• Refrigerant circulation: Various refrigerants are required for cooling and circulation in the chemical production process. A chiller can provide the low-temperature environment required for the refrigerant and control its circulation process to ensure its stability and safety throughout the entire production process.
• Freeze drying: In chemical production processes, freeze drying technology is used to remove moisture from products. The chiller provides the low-temperature environment required for freeze-drying and controls the temperature and humidity of freeze-drying to ensure that the product drying quality meets the requirements.
• Cooling testing equipment: The chiller can also be used to cool various testing equipment, such as temperature testers, pressure testers, etc. These devices need to be tested under specific temperature and pressure conditions to ensure that the quality and performance of the product meet the requirements. The chiller provides a stable temperature environment to ensure the accuracy and reliability of test results.

Specific application cases of chillers in the manufacturing process of catalytic materials include:

• Chemical reaction control: Many chemical reactions carried out at high temperatures may result in excessively fast reaction rates and even trigger side reactions, affecting the purity and yield of the product. The chiller can effectively control the reaction temperature, maintain it within an appropriate range, and ensure the controllability and safety of the reaction.
• Equipment cooling: Reactors, evaporators, condensers, and other equipment generate a large amount of heat during operation. The cooling water provided by the chiller can quickly remove this heat, prevent equipment from overheating, and extend the service life of the equipment.
• Post processing and storage: During the post-processing and storage process of the product, the chiller can provide a precise low-temperature environment to ensure the crystallization quality and purity of the product, and prevent chemicals from deteriorating or degrading during storage.
• The main functions of the chiller in the manufacturing process of catalytic materials include the following aspects:
• Cooling high-temperature gases: Catalytic coolers utilize the action of catalysts to convert and remove harmful substances from high-temperature gases, while reducing the temperature of the gas. Catalysts can accelerate the rate of chemical reactions, enabling gases to complete the cooling and purification process in a shorter period of time.
• Improve production efficiency: Catalytic coolers can quickly and effectively cool high-temperature gases, avoiding damage to production equipment caused by high gas temperatures, thereby improving production efficiency.
• Protecting the environment: Through the treatment of catalytic coolers, harmful substances in high-temperature gases are removed, reducing pollution to the environment and achieving harmonious development between industrial production and environmental protection.
• Energy saving and consumption reducing: Catalytic coolers can not only reduce gas temperature, but also recover some heat for use in other production processes, thereby achieving the goal of energy saving and consumption reducing.
• Controllo accurato della temperatura: Catalytic coolers help reduce waiting time and energy consumption in the production process by precisely controlling the cooling rate and temperature of materials, thereby improving the overall operational efficiency of the production line.
• Stable production environment: An efficient cooling system helps reduce heat accumulation during the production process, lower the ambient temperature, and create a more comfortable working environment for workers.

LNEYA’s material manufacturing process includes multiple series and models of chillers with different temperature control ranges and cooling methods, meeting the needs of users from multiple industries and processes. Fully enclosed system with high temperature drop function, with a minimum precision of ± 0.05 ℃, providing customized solutions and installation support.

In the field of industrial automation, sensors are used to monitor and control various force parameters in the production process, ensuring production efficiency and product quality. For example, pressure sensors are widely used in fields such as pneumatic, hydraulic, and vacuum systems to monitor and control various pressure parameters. In the aerospace field, sensors are used for structural testing and engine thrust measurement of aircraft, rockets, and other spacecraft to ensure their safety and performance. For example, pressure sensors are used to monitor pressure changes inside the engine to ensure the normal operation of the aircraft. Accurate force measurement of various components is required in the automotive manufacturing process to ensure the safety and comfort of the car. Sensors have broad application prospects in the field of automotive manufacturing. For example, temperature sensors are used to measure environmental temperature and are commonly used in fields such as automobiles and medical devices to achieve precise control and monitoring.

The main reasons for needing a chiller are as follows:

• The impact of temperature changes on sensor performance: Sensors are highly sensitive to temperature changes. For example, the coolant temperature sensor is equipped with a thermistor with a negative temperature coefficient inside. When the engine coolant temperature changes, the resistance of the thermistor will change accordingly, thereby affecting the output voltage of the sensor. If the temperature inside the sensor box fluctuates greatly, it will lead to inaccurate measurement results of the sensor, affecting the reliability of the data.
• Ensure the accuracy of experiments or tests: In scientific research and industrial production, maintaining constant temperature conditions is key to ensuring the accuracy of experimental or test results. The cooling water machine can provide a stable ambient temperature, avoiding the influence of external temperature changes on sensor measurement results, thereby ensuring the accuracy and repeatability of data.
• Prevent sensor overheating: In high temperature environments, sensors may overheat, leading to performance degradation or even damage. The chiller can effectively reduce the working temperature of the sensor, extend its service life, and ensure its stable operation by circulating coolant or other cooling media.
• Reduce sources of error: Temperature fluctuations are an important source of error. By using a chiller, errors caused by temperature fluctuations can be reduced, and measurement accuracy and stability can be improved. This is particularly important for applications that require high-precision measurements.

The advantages of LNEYA’s cooling chiller system:

• Widely used in the field of new energy vehicles, suitable for the new generation of energy type battery packs, it can effectively test the super strong environmental adaptability of battery packs, improve the safety and reliability of the entire vehicle, and ensure the good operation of vehicles in various complex environments. The product is widely used for extreme performance testing of motors, battery packs, rapid temperature rise and fall thermal shock testing, as well as comprehensive environmental adaptability evaluation testing.
• Adopting a variable frequency scroll compressor, the operating speed is automatically adjusted according to actual needs to provide the required refrigeration energy. Compared with traditional fixed frequency compressors, it significantly reduces energy consumption and improves energy efficiency performance. Constant power output function for both hot and cold.
• Rated testing conditions for all equipment: Ball temperature: 20 ℃; Wet bulb temperature: 16 ℃. Inlet water temperature: 20 ℃; Outlet temperature: 25 ℃.